
COMMERCIAL BUILDING WASHING IN DALLAS, TX - PAGE
Professional exterior cleaning for office buildings, retail centers, warehouses, and multi-story structures. Surface-safe methods for brick, concrete, metal, and stone.
CRI Washing Dallas delivers professional building exterior cleaning using surface-appropriate commercial power washing methods. We'll assess your building's specific materials and use the right pressure, temperature, and cleaning solution for the job, restoring its appearance and protecting your investment. We also offer eco-friendly solutions!
2M+
Square feet washed yearly
175+
Buildings maintained quarterly
18+
Liability insurance coverage
15min
Years combined team experience

OUR EXPERTISE
COMMERCIAL BUILDINGS WE WASH ACROSS DALLAS
.png)
Office Buildings & Corporate Campuses

Retail Centers & Shopping Complexes
.png)
Warehouses & Industrial Facilities
.png)
Apartment Buildings & Multi-Family Properties

Medical Office Buildings & Healthcare Facilities
.png)
Educational & Institutional Buildings
SURFACE EXPERTISE
BUILDING EXTERIOR SURFACES WE PRESSURE WASH
.png)
BRICK & MASONRY (500-1,200 PSI)
We carefully adjust our pressure based on the age and condition of your brick to prevent damage, especially on older commercial properties with softer mortar. We safely remove white mineral stains, algae, and dirt buildup, protecting your brick and mortar.

CONCRETE & PRECAST PANELS (2,500-3,500 PSI)
We specialize in cleaning tilt-wall buildings and precast concrete panels commonly found on Dallas commercial properties. We use professional surface cleaners (not just pressure wands) to prevent striping while we safely remove oil stains, tire marks, algae, and built-up dirt.
.png)
METAL SIDING & PANELS (1,500-2,000 PSI)
Corrugated metal, aluminum panels, and painted metal surfaces need the right cleaning solutions to prevent oxidation and protect the original finish. We use pH-neutral cleaners and hot water systems (up to 250°F) to safely remove chalking, pollution buildup, and biological growth.
.png)
NATURAL & CAST STONE (800-1,500 PSI)
Our stone facade cleaning service is designed for limestone, granite, and cast stone surfaces commonly found on Dallas office and institutional buildings. We use the right cleaning agents and carefully controlled pressure to remove dirt and buildup without damaging the stone.

GLASS & STOREFRONT SYSTEMS (LOW-PRESSURE RINSE)
We use low pressure to safely clean window frames, mullions, and curtain wall systems with our exterior frame and storefront cleaning service. We clean surrounding surfaces carefully and can coordinate full window washing or include it in the project scope when needed.

OUR PROCESS
OUR COMMERCIAL BUILDING WASHING PROCESS
STEP# 1
%201.png)
INQUIRY & INTAKE
If you're interested in our building power washing services, get in touch by giving us a call or filling out our contact form. We'll ask you about your building type and square footage, as well as its exterior materials, the number of stories, and any specific concerns you might have (e.g., biological growth or graffiti).
STEP# 2

SITE ASSESSMENT
Once we know exactly what you're looking for, we'll arrange to evaluate your building on-site or ask you to send us detailed photos. We'll identify all exterior materials and make note of any areas that need special attention. We'll also locate storm drains and access points, and determine what equipment we'll need.
STEP# 3
%201.png)
WRITTEN QUOTE & SCOPE
We'll then go ahead and send you a free estimate containing itemized pricing for everything involved in our commercial pressure washing service for your building. Under our Stain-Expectation Guarantee, we'll also take the time to explain what will and won't come clean before we get started with the work.
STEP# 4
%201.png)
SCHEDULING & COORDINATION
Next, we'll schedule a day and time to conduct our service. If you prefer weekend or after-hours work (as many of our commercial clients do), we're happy to accomodate to your business. We'll confirm access requirements and notify affected tenants if needed, as well as coordinating any parking restrictions.
STEP# 5

ENVIRONMENTAL SETUP
Before any water touches your building, we'll make sure to block nearby storm drains and set up containment where needed, along with positioning water recovery equipment. This keeps us (and you) on the right side of Dallas stormwater regulations, something that many other contractors are known to skip.
STEP# 6

PROFESSIONAL CLEANING
With all the prep work done, we're ready to start power washing your commercial property. We'll execute the scope using surface-appropriate methods, working systematically from top to bottom, and protecting your landscaping and adjacent surfaces as we go. For multi-story work, we use boom lifts for safety and efficiency.
STEP# 7

FINAL WALKTHROUGH
Before leaving, we'll inspect every surface with you or your representative. We'll document completion with photos and discuss our maintenance recommendations for extending your results, including how often we recommend reservicing based on your building's exposure and materials.
LEGAL COMPLIANCE
COMPLIANT BUILDING WASHING, GUARANTEED
Did you know? Dallas City Code SEC. 19-118.2 explicitly prohibits discharging building washing wastewater containing soap, detergent, or cleaning substances to the storm drainage system. This is enforceable law with significant penalties.
Potential Fines for Non-Compliant Building Washing:
-
Dallas local violations: $250-$2,000 per day
-
Federal Clean Water Act violations: $25,000-$50,000 per day
Property owners bear ultimate liability, even when contractors cause the violation.
Rest assured that we follow the required best management practices on every building washing job. This involves blocking storm drains with weighted covers and booms, capturing wastewater using wet vacuums and disposing of it to the sanitary sewer system, using full containment protocols for any chemicals we use, and providing documentation of our disposal methods for your compliance records. Every job is completed to the highest quality and complies with the Federal Clean Water Act.
WHY CHOOSE US
WHY CRI WASHING DALLAS?

SURFACE-SAFE CLEANING GUARANTEE
We match specific pressure levels and cleaning agents to your building’s unique materials, ensuring a deep clean without the risk of etching, chipping, or water intrusion.
.png)
SAFETY SETUP GUARANTEE
From OSHA-compliant lift operations to secure pedestrian cordons, we prioritize the safety of your tenants, customers, and our crew throughout the entire cleaning project.
%202.png)
STAIN-EXPECTATION GUARANTEE
We provide honest, professional assessments during our walkthrough, ensuring you know exactly which stains can be fully removed versus those requiring specialized restoration services.
CARE FOR CUSTOMERS GUARANTEE
Our team prioritizes clear communication and flexible scheduling, working around your business hours to ensure a seamless service experience with minimal operational disruption.

$2 MILLION INSURANCE PROTECTION
Work with confidence knowing we carry comprehensive liability coverage, protecting your commercial assets and providing full documentation for your compliance and peace of mind.

FAQS
FREQUENTLY ASKED QUESTIONS
Get answers to the questions property managers ask most about commercial Building washing services in Dallas TX.

CONTACT US
CONTACT US FOR COMMERCIAL BUILDING WASHING IN DALLAS
We're the preferred choice for commercial soft washing for properties throughout the Dallas area, including office buildings, retail centers, medical facilities, apartment complexes, industrial buildings, and HOA communities with stucco, EIFS, painted exteriors, and other delicate surfaces.

Let’s Get Started

.png)



